Fans→
A1 mini is equipped with 3 fans, namely hotend cooling fan, part cooling fan and mainboard cooling fan. In order to ensure that the machine has a good cooling effect, it is necessary to check the status of the fan regularly and remove foreign objects in a timely manner.
| Parts | When | Materials & Tools | Solution | How to do |
| Part cooling fan | Every week | Cloth,Tweezers | Cleaning | Check whether there is foreign objects or dust accumulation in the air duct and clean it |
| Hotend cooling fan | Every week | Cloth,Tweezers | Cleaning | Remove the hotend, check whether there is foreign objects or dust accumulation in the air duct and clean it |
| Mainboard cooling fan | HMS prompts | Compressed air (or high-pressure air gun), Cloth,Tweezers | Cleaning | Use compressed air jets to remove accumulated dust, or disassemble the base plate and wipe the fan clean. |
Video guide for cleaning the fans: TUTORIAL VIDEO
Guide rail system X-Z-Y→
We spent extra to bring you the most reliable All-metal rails and cover-protected drive system. This rail system ensures that you do not need to frequently adjust the moving components of the A1 mini, but requires regular lubrication and cleaning to reduce wear and noise, ensure the accuracy and lifespan of the printer, and effectively prevent the guide rails from rusting.
| Parts | When | Materials & Tools | Solution | How to do |
| X rail | Every month | Cloth,Tweezers,Lubricant oil Video guide for lubricating the X-axis: TUTORIAL | Cleaning, Lubricate | Use tweezers to clean the lumpy and filamentous foreign objects on the guide rail, and wipe the granular foreign objects and stains with a dust-free cloth; re-lubricate the X track, and slide the tool head back and forth after lubricating to ensure that the lubricant lubricates the entire linear rail. |
| Z rail | Every month | Cloth,Tweezers,Lubricant oil Video guide for lubricating the Z-axis: TUTORIAL | Cleaning, Lubricate | Use tweezers to clean the lumpy and filamentous foreign matter on the guide rail, and wipe the granular foreign matter and stains with a dust-free cloth; re-lubricate the Z rail, and the oil filling hole in the middle of the slider can also be lubricated. Pay attention to cleaning up foreign matter in the groove of the linear rail. After applying oil, turn on the printer and control the Z-axis to move up and down to ensure that the lubricating oil lubricates the entire linear rail. |
| Y rail | Every month | Cloth,Tweezers,Lubricant oil / Video guide for lubricating the Y-axis:TUTORIAL | Cleaning, Lubricate | Use tweezers to clean the lumpy and filamentous foreign objects on the guide rail, and wipe the granular foreign objects and stains with a dust-free cloth; re-lubricate the Y rails on both sides, and slide the heatbed back and forth after lubricating to ensure that the lubricant lubricates the entire Y rail. |
X Y timing belts→
A1 mini can check the belt tension automatically through the vibration frequency calibration. If the belt is loose, the HMS system will notify you to use the auto belt tensioner to set the belt to the right tension.
| Parts | When | Materials & Tools | Solution | How to do |
| X Belt | HMS prompts | H2 Hex key | Re-tension | Loosen the tensioning screw behind the tool head, move the toolhead along the X rail， and then hold the triangular screw（But do not press with force） on the right side with your hand, and re-tighten the tightening screw. |
| Y Belt | HMS prompts | H2 Hex key | Re-tension | After removing the Y-axis rear cover, loosen the tensioning screw, push the Y-axis tensioning slider forcefully along the Y-axis 2 to 3 times to ensure that it is not stuck, and then re-tighten the tightening screw. |
If after long-term use, the timing belt has shown obvious wear and affects the print quality, please refer to the relevant maintenance guide page to replace the timing belt.
Hotend
The A1 mini hot end adopts a quick-release buckle design. In order to ensure the normal function of the hot end quick-release, and to promptly remove the residue on the surface of the hot end and the heating assembly to ensure the accuracy of the hotend temperature measurement, it needs to be removed regularly. and clean the surface of the heating element. If you find that the nozzle is obviously worn causing material leakage, please replace the spare hot end.
| Parts | When | Materials & Tools | Solution | How to do |
| Hotend Heating Assembly | Every month | Glooves,Cloth,Tweezers | Cleaning | After removing the silicone sock, clean the attachments on the hot end, then remove the hot end, use tweezers to roll up a lint-free cloth dipped in absolute alcohol, and wipe the surface of the heating assembly clean. |
| Hotend | Wear and leakage | Hotend | Replacement | Refer to the hot end replacement instructions attached to the extruder for replacement. |
Note:
1. If there is residual material attached to the hotend and the hotend cannot be removed normally, you need to set the temperature to 80 degrees to soften the residue before removing it;
2. Please be sure to install the hotend silicone sock after the cleaning, or it will cause some hotend temperature warning.
Hotend Replacement Video Guide: TUTORIAL
Filament Cutter
Like the X-series printers, the A1 mini is also equipped with a cutter to achieve automatic filament changing. If you use multi-color printing, the cutter blade will become dull or even chipped after printing multiple rolls of filaments. Therefore, it is recommended to check regularly to ensure that the blade is still sharp and intact to avoid losing steps due to high cutting resistance and improve printing success rate.
| Parts | When | Materials & Tools | Solution | How to do |
| Filament cutter | Check the blade once every 3 rolls of PLA\ABS\PETG | Hex key | Replacement | Disassemble the filament pressing block and check whether the blade is missing. If there is any abnormality, release the cutter handle and replace it with a new cutter. |
Video guide for filament cutter maintenance and replacement: TUTORIAL LINK
We also have a detailed Filament Cutter Replacement Guide available for this procedure.
Heatbed Nozzle Wiper
The A1 min nozzle wiper assembly actually includes two accessories, a silicone nozzle wiper and a metal plate wiper. The silicone wiper is used to clean the residual waste on the nozzle, and the metal plate wiper is used to clean the nozzle end surface to ensure it is smooth. If the nozzle wiper assembly is damaged or deformed, you will need to replace it to ensure the nozzle cleaning effect.
| Parts | When | Materials & Tools | Solution | How to do |
| Heatbed Nozzle Wiper | The silicone wiper is damaged/the stainless steel wiper is deformed | Hex key | Replacement | The silicone wiper is replaced together with the base, and the metal wiper only needs to be replaced separately. |
Lead screw Z→
There is only one lead screw in the A1 mini. Through the lead screw, the Z-axis motor can drive the X-axis to move up and down along the Z-axis direction. Proper lubrication will ensure the smooth operation of the X-axis along the Z direction, and can effectively reduce the noise caused by the movement of the screw.
| Parts | When | Materials & Tools | Solution | How to do |
| Lead screw | Every 3 months | Lubricant grease or oil | Lubricate | Apply grease to the working area and the bottom bearing, turn on the printer, and control the printer to move the X-axis up and down along the Z direction to ensure that the entire lead screw working area is coated with grease. |
Video guide for lubricating the lead screws: TUTORIAL VIDEO LINK
If necessary, you can tilt the printer slightly and then apply lubricant oil to the lead screw.
Idler pulley→
This mainly refers to the idler pulley of the X-axis. Regular maintenance of the idler pulley can effectively prevent abnormal noise and abnormal resistance.
| Parts | When | Materials & Tools | Solution | How to do |
| Idler pulley | Every 3 months | Lubricant oil, hex key | Lubricate | Near the X-axis end cover, drop an appropriate amount of clear oil between the belt and the idler pulley. |
PTFE Tube
We send the filament from the AMS lite (or Spool Holder) to the filament hub through a PTFE tube. After long-term friction with the filaments, the PTFE tube will wear to varying degrees and increase the filament supply resistance. In order to avoid abnormal filament transportation caused by wear of the PTFE tube, the PTFE tube should be replaced when there are obvious signs of wear.
| Parts | When | Materials & Tools | Solution | How to do |
| PTFE Tube | PLA and other non-carbon fiber materials, every 6 rolls; carbon fiber materials or ploywood and other high friction materials, every 2 rolls | With hands or with the help of auxiliary tools | Replacement | Press the filament hub's connector and pull the material tube upward; if it is difficult to press it with bare hands, you can use tools such as printed models or tweezers. |
Note: The specifications of the PTFE tube used by A1 mini are 4mm outer diameter and 2.5mm inner diameter.
These things are not included in the checkilist because not only very essential because they are seen if they are not good but now I insert them anyway below
Hotend Silicone Sock
The hotend silicone sock helps maintain the stability of the hotend temperature. If there are signs of damage on the silicone sock, or the silicone sock cannot be fixed well on the hotend, the silicone sock should be replaced to avoid some print quality caused by temperature difference
| Parts | When | Materials & Tools | Solution | How to do |
| Hotend Silicone Sock | Damaged or unable to be installed | Hotend Silicone Sock | Replacement | When the hotend temperature is below 60 degrees, refer to the hotend replacement guide attached to the extruder for replacement. |
Note: Please be sure to install the hotend silicone sock, or it will cause some hotend temperature warning.
Purge Wiper
The A1 mini's purge wiper is used to efficiently process the waste material ejected from the nozzle to ensure a continuous and smooth printing process. When the movement of the purge wiper is blocked by foreign objects or the action mechanism is deformed, the purge wiper may become stuck, causing abnormal discharging or causing the printer to lose steps. Therefore, it is necessary to promptly clean up foreign objects and replace the deformed purge wiper to improve the success rate of filament exchange and enhance the printing experience.
| Parts | When | Materials & Tools | Solution | How to do |
| Purge Wiper | Excess accumulation or purge wiper deformation | Tweezers, Hex key，Air blower | Cleaning, Replacement | Remove the tool head from the purge wiper , use tweezers to remove excess waste, and use a blower to blow off residue and dust. |
Extruder Gear Assembly
When cleaning the extruder according to the above steps fails to achieve satisfactory results, you can disassemble the extruder and remove the extrusion wheel assembly for cleaning. If there is an abnormality in the extrusion gear or bearing, you can replace the gear assembly.
| Parts | When | Materials & Tools | Solution | How to do |
| Extruder Gear Assembly | Under-extrusion，Extruder clog | Tweezers, Hex key，Air blower | Cleaning | When cleaning the extruder, if you find foreign materials that cannot be removed, you need to remove the extrusion front cover and take out the extrusion wheel assembly for cleaning. For specific disassembly and assembly methods, please refer to the relevant maintenance guide page. |
Filament Sensor
There are several Hall sensors on the filament sensor board. The attachment of foreign matter such as material fragments and dust will cause abnormal Hall values and cause false alarms. Cleaning the filament sensor board in time can effectively solve the problem of false alarms and improve the printing experience.
| Parts | When | Materials & Tools | Solution | How to do |
| Filament sensor | False alarm | Hex key, Air blower | Cleaning | Unscrew the 2 screws, carefully pull out the entire bottom bracket assembly, remove the 2 screws that lock the filament sensor, and clean with a blower. |
Video guide for cleaning the filament sensor board: TUTORIAL LINK VIDEO
